| 名稱 | 顏色 | |
|---|
| 1 X Barb / Claw / Horn / Tooth - Medium | Red | |  |
| 2 X Dinosaur Tail End Section / Horn | Dark Turquoise | |  |
| 6 X Barb / Claw / Horn / Tooth - Small | Pearl Gold | |  |
| 4 X Barb / Claw / Horn / Tooth with Clip | Pearl Gold | |  |
| 2 X Technic, Liftarm Thick 1 x 7 | Black | |  |
| 2 X Technic, Liftarm Thick 1 x 1 (Spacer) | Black | |  |
| 2 X Technic, Axle and Pin Connector Perpendicular Double | Black | |  |
| 2 X Technic, Axle and Pin Connector Perpendicular Triple | Black | |  |
| 2 X Technic, Pin with Friction Ridges and Pin Hole | Dark Bluish Gray | |  |
| 2 X Technic, Axle and Pin Connector Perpendicular | Dark Bluish Gray | |  |
| 4 X Brick, Modified 1 x 2 with Log Profile | Dark Bluish Gray | |  |
| 6 X Wedge 2 x 1 x 2/3 with Stud Notch Right | White | |  |
| 6 X Wedge 2 x 1 x 2/3 with Stud Notch Left | White | |  |
| 2 X Slope, Curved 2 x 2 Inverted | Black | |  |
| 2 X Arch 1 x 3 x 2 Curved Top | Black | |  |
| 4 X Slope, Curved 4 x 2 | Green | |  |
| 6 X Slope, Curved 2 x 1 | Green | |  |
| 1 X Slope, Curved 4 x 1 Double | Green | |  |
| 1 X Wedge 2 x 1 x 2/3 with Stud Notch Left | Green | |  |
| 1 X Wedge 2 x 1 x 2/3 with Stud Notch Right | Green | |  |
| 2 X Arch 1 x 3 x 2 Curved Top | Bright Green | |  |
| 2 X Slope, Curved 4 x 1 Inverted | Dark Blue | |  |
| 7 X Wedge 2 x 1 x 2/3 with Stud Notch Right | Dark Blue | |  |
| 4 X Slope, Curved 4 x 1 | Dark Blue | |  |
| 2 X Arch 1 x 3 x 2 Inverted | Dark Blue | |  |
| 7 X Wedge 2 x 1 x 2/3 with Stud Notch Left | Dark Blue | |  |
| 2 X Slope, Curved 2 x 1 Inverted | Sand Green | |  |
| 2 X Slope, Curved 4 x 1 Double | Reddish Brown | |  |
| 2 X Slope, Curved 2 x 2 | Dark Bluish Gray | |  |
| 4 X Wedge 2 x 1 x 2/3 with Stud Notch Left | Medium Azure | |  |
| 4 X Wedge 2 x 1 x 2/3 with Stud Notch Right | Medium Azure | |  |
| 2 X Wedge 6 x 4 Triple Curved | Green | |  |
| 2 X Technic, Brick Modified 2 x 2 with Pin Holes and Rotation Joint Ball Half (Vertical Side) | Black | |  |
| 1 X Bracket 3 x 2 x 1 1/3 with Bottom Stud Holder | Black | |  |
| 1 X Bracket 5 x 2 x 2 1/3 with 2 Holes and Bottom Stud Holder | Black | |  |
| 1 X Technic, Brick Modified 2 x 2 with Pin Holes and 2 Rotation Joint Sockets | Black | |  |
| 2 X Brick, Modified 1 x 2 with Studs on Side | Green | |  |
| 4 X Technic, Brick Modified 2 x 2 with Ball Joint and Axle Hole with 6 Holes in Ball | Dark Bluish Gray | |  |
| 2 X Brick, Modified 1 x 1 with Studs on 2 Sides, Opposite | Dark Bluish Gray | |  |
| 1 X Technic, Brick Modified 2 x 2 with 2 Ball Joints and Axle Hole | Dark Bluish Gray | |  |
| 6 X Technic Rotation Joint Ball Loop with Two Perpendicular Pins with Friction | Dark Bluish Gray | |  |
| 8 X Cone 1 x 1 with Top Groove | Black | |  |
| 2 X Brick, Round Corner 6 x 6 x 2 | Dark Blue | |  |
| 4 X Brick, Round Corner 3 x 3 x 2 Dome Top | Dark Blue | |  |
| 6 X Brick, Round 1 x 1 Open Stud | Dark Blue | |  |
| 2 X Brick, Modified 1 x 2 with Pins | White | |  |
| 4 X Technic, Brick 1 x 2 with Holes | Black | |  |
| 4 X Technic, Brick 1 x 1 with Axle Hole | Sand Green | |  |
| 2 X Technic, Brick 1 x 2 with Holes | Sand Green | |  |
| 2 X Technic, Brick Modified 1 x 2 with Hole and 1 x 2 Plate | Light Bluish Gray | |  |
| 6 X Technic, Brick 1 x 2 with Holes | Dark Bluish Gray | |  |
| 1 X Slope, Inverted 45 4 x 2 Double with 2 x 2 Cutout | Black | |  |
| 2 X Slope 30 1 x 1 x 2/3 | Green | |  |
| 4 X Slope 45 2 x 1 with 2/3 Cutout | Green | |  |
| 5 X Slope 45 1 x 1 x 2/3 Quadruple Convex Pyramid | Bright Green | |  |
| 1 X Slope, Inverted 33 3 x 2 with Connections between Studs | Dark Blue | |  |
| 2 X Slope 33 3 x 1 | Dark Blue | |  |
| 2 X Slope 45 2 x 1 with Cutout without Stud | Dark Blue | |  |
| 3 X Slope, Inverted 45 2 x 1 | Dark Blue | |  |
| 1 X Slope, Inverted 45 2 x 2 | Dark Blue | |  |
| 2 X Slope 45 2 x 1 with 2/3 Cutout | Dark Blue | |  |
| 2 X Slope 30 1 x 1 x 2/3 | Dark Blue | |  |
| 3 X Slope 45 2 x 1 with Cutout without Stud | Dark Bluish Gray | |  |
| 1 X Slope 30 1 x 2 x 2/3 | Medium Azure | |  |
| 6 X Technic, Axle 2L Notched | Red | |  |
| 8 X Technic, Axle 1L with Pin with Friction Ridges | Blue | |  |
| 2 X Technic, Axle Connector with Axle Hole | Black | |  |
| 10 X Technic, Axle 6L | Black | |  |
| 2 X Technic, Axle 10L | Black | |  |
| 7 X Technic, Axle Connector 2L (Smooth with x Hole + Orientation) | Black | |  |
| 6 X Technic, Axle 2L Notched | Black | |  |
| 14 X Technic, Pin with Friction Ridges | Black | |  |
| 8 X Technic, Axle and Pin Connector Angled #5 - 112.5 degrees | Black | |  |
| 18 X Technic, Pin with Friction Ridges and Tow Ball with Round Pin Hole | Black | |  |
| 4 X Technic, Axle 3L with Stud | Dark Tan | |  |
| 10 X Technic, Axle and Pin Connector Angled #3 - 157.5 degrees | Dark Green | |  |
| 4 X Technic, Axle Connector 3L | Dark Green | |  |
| 1 X Technic, Axle 1L with Tow Ball | Light Bluish Gray | |  |
| 2 X Technic, Axle Connector Hub with 3 Axles | Light Bluish Gray | |  |
| 4 X Technic, Pin 1/2 without Friction Ridges | Light Bluish Gray | |  |
| 8 X Technic Bush 1/2 Smooth | Light Bluish Gray | |  |
| 2 X Technic, Axle 2L with Reverser Handle Axle Connector | Dark Bluish Gray | |  |
| 2 X Technic, Axle and Pin Connector Hub with 2 Axles | Dark Bluish Gray | |  |
| 1 X Bar 1L with Clip Mechanical Claw - Cut Edges and Hole on Side | Dark Bluish Gray | |  |
| 2 X Technic, Pin 3L with Friction Ridges and Stop Bush | Pearl Gold | |  |
| 2 X Slope, Curved 1 x 2 x 2/3 Wing End | Black | |  |
| 4 X Tile, Modified 2 x 3 Pentagonal | Green | |  |
| 2 X Slope 18 2 x 1 x 2/3 with 4 Slots | Dark Blue | |  |
| 2 X Tile, Modified 2 x 3 Pentagonal | Dark Blue | |  |
| 2 X Slope, Curved 1 x 2 x 2/3 Wing End | Pearl Gold | |  |
| 2 X Large Figure Weapon Blade Jagged with Axle Hole | Pearl Gold | |  |
| 1 X Arm Mechanical, Exo-Force / Bionicle, Thick Support | Black | |  |
| 2 X Hero Factory Weapon - Claw with Clip | Pearl Gold | |  |
| 2 X Minifigure, Utensil Dynamite Sticks Bundle | Red | |  |
| 1 X Minifigure, Weapon Sword, Shamshir/Katana (Square Guard) with Capped Pommel and Holes in Crossguard and Blade | Lime | |  |
| 1 X Plate, Modified 2 x 3 Inverted with 4 Studs and Bar Handle on Bottom - Closed Ends (Rocker Plate) | Dark Bluish Gray | |  |
| 1 X Minifigure, Weapon Harpoon, Smooth Shaft | Pearl Gold | |  |
| 1 X Propeller 1 Blade 16L with Axle (Sword Blade) | Pearl Gold | |  |
| 1 X Minifigure, Weapon Lightsaber Hilt Straight | Pearl Gold | |  |
| 1 X Minifigure, Weapon Sword, Shamshir/Katana (Square Guard) with Capped Pommel and Holes in Crossguard and Blade | Flat Silver | |  |
| 1 X Minifigure, Weapon Sword, Saber/Dao Curved Blade and Hilt with Bar End | Flat Silver | |  |
| 1 X Minifigure, Weapon Sword, Shamshir/Katana (Square Guard) with Capped Pommel and Holes in Crossguard and Blade | Medium Azure | |  |
| 1 X Projectile Launcher, 1 x 4 Spring Shooter with Light Bluish Gray Top | Dark Bluish Gray | |  |
| 2 X Technic Rotation Joint Disk with Pin Hole and 3L Liftarm Thick | Dark Bluish Gray | |  |
| 2 X Projectile Arrow, Bar 8L with Round End (Spring Shooter Dart) | Trans-Bright Green | |  |
| 1 X Brick and Axle Separator | Dark Turquoise | |  |
| 1 X Minifigure, Utensil Ingot / Bar | Pearl Dark Gray | |  |
| 4 X Plate 1 x 2 | Red | |  |
| 2 X Plate, Modified 1 x 3 with 2 Studs (Double Jumper) | Black | |  |
| 1 X Plate 2 x 8 | Black | |  |
| 15 X Plate 1 x 1 | Green | |  |
| 2 X Plate 1 x 6 | Green | |  |
| 2 X Plate 1 x 2 | Green | |  |
| 1 X Plate 2 x 6 | Green | |  |
| 2 X Plate 1 x 3 | Green | |  |
| 3 X Plate 2 x 3 | Green | |  |
| 4 X Tile 1 x 1 with Groove | Bright Green | |  |
| 1 X Tile 1 x 2 with Groove | Bright Green | |  |
| 6 X Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper) | Bright Green | |  |
| 4 X Plate 1 x 2 | Bright Green | |  |
| 2 X Tile, Modified 2 x 2 Triangular | Bright Green | |  |
| 2 X Plate 1 x 2 | Orange | |  |
| 9 X Plate 2 x 3 | Dark Blue | |  |
| 1 X Plate 2 x 14 | Dark Blue | |  |
| 2 X Plate, Modified 1 x 4 with 2 Studs with Groove | Dark Blue | |  |
| 11 X Plate 1 x 2 | Dark Blue | |  |
| 4 X Plate 1 x 1 | Dark Blue | |  |
| 4 X Tile 1 x 2 with Groove | Dark Blue | |  |
| 2 X Plate 2 x 2 | Dark Blue | |  |
| 3 X Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper) | Dark Blue | |  |
| 2 X Plate 2 x 2 Corner | Dark Blue | |  |
| 2 X Plate 1 x 3 | Dark Blue | |  |
| 1 X Plate 4 x 4 | Dark Blue | |  |
| 2 X Tile 2 x 2 with Groove | Dark Blue | |  |
| 1 X Tile, Modified 2 x 2 with Studs on Edge | Dark Red | |  |
| 1 X Plate 2 x 3 | Dark Red | |  |
| 2 X Plate 1 x 2 | Bright Light Orange | |  |
| 2 X Plate, Modified 1 x 4 with 2 Studs with Groove | Reddish Brown | |  |
| 1 X Plate 2 x 4 | Reddish Brown | |  |
| 4 X Plate, Modified 1 x 4 with 2 Studs with Groove | Dark Bluish Gray | |  |
| 2 X Tile 1 x 3 | Medium Azure | |  |
| 14 X Plate 1 x 2 | Medium Azure | |  |
| 4 X Plate 1 x 4 | Medium Azure | |  |
| 4 X Plate 2 x 4 | Medium Azure | |  |
| 5 X Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper) | Medium Azure | |  |
| 12 X Plate, Round 1 x 1 with Bar Handle on Side - Closed Ends | White | |  |
| 1 X Plate, Modified 1 x 2 with 2 Open O Clips (Horizontal Grip) | Red | |  |
| 14 X Bracket 1 x 2 - 1 x 2 Inverted | Black | |  |
| 4 X Plate, Modified 1 x 1 with Open O Clip (Horizontal Grip) | Black | |  |
| 6 X Bracket 1 x 1 - 1 x 2 Inverted | Black | |  |
| 6 X Plate, Modified 1 x 2 with Clip on End (Vertical Grip) | Black | |  |
| 4 X Plate, Modified 1 x 2 with Open O Clip on Top | Black | |  |
| 12 X Bracket 1 x 2 - 1 x 4 with Two Rounded Corners at the Bottom | Black | |  |
| 1 X Plate, Modified 2 x 3 with Hole | Black | |  |
| 3 X Plate, Modified 1 x 2 with Bar Arm Up (Horizontal Arm 5mm) | Black | |  |
| 3 X Bracket 1 x 2 - 2 x 2 Inverted | Black | |  |
| 2 X Plate, Modified 1 x 4 with Bar Arm Down | Black | |  |
| 1 X Plate, Modified 1 x 2 with Bar Handle on End - Closed Ends | Black | |  |
| 2 X Bracket 1 x 2 - 2 x 2 | Green | |  |
| 2 X Plate, Round 1 x 2 with Open Studs | Green | |  |
| 1 X Tile, Modified 1 x 1 with Open O Clip | Dark Turquoise | |  |
| 1 X Plate, Round 1 x 1 with Bar Handle on Side - Closed Ends | Dark Blue | |  |
| 2 X Bracket 1 x 1 - 1 x 1 | Dark Blue | |  |
| 5 X Bracket 1 x 2 - 1 x 2 | Dark Blue | |  |
| 3 X Plate, Modified 1 x 2 with Door Rail | Dark Blue | |  |
| 3 X Bracket 1 x 2 - 2 x 2 | Dark Blue | |  |
| 1 X Plate, Modified 2 x 2 x 2/3 with 2 Studs on Side | Sand Green | |  |
| 1 X Technic, Plate 1 x 5 with Smooth Ends, 4 Studs and Center Axle Hole | Reddish Brown | |  |
| 6 X Bracket 1 x 1 - 1 x 1 Inverted | Reddish Brown | |  |
| 3 X Plate, Modified 1 x 2 with Clip on Side (Horizontal Grip) | Reddish Brown | |  |
| 2 X Bracket 1 x 1 - 1 x 2 Inverted | Reddish Brown | |  |
| 6 X Bracket 1 x 1 - 1 x 2 | Light Bluish Gray | |  |
| 1 X Hinge Plate 1 x 2 Locking with 2 Fingers on End and 7 Teeth without Bottom Groove | Light Bluish Gray | |  |
| 2 X Plate, Modified 1 x 2 with Small Tow Ball Socket on End | Light Bluish Gray | |  |
| 3 X Plate, Modified 1 x 2 with Small Tow Ball Socket on Side | Light Bluish Gray | |  |
| 1 X Plate, Modified 1 x 2 with 2 Open O Clips (Horizontal Grip) | Dark Bluish Gray | |  |
| 2 X Bracket 1 x 2 - 1 x 2 | Dark Bluish Gray | |  |
| 3 X Plate, Modified 1 x 2 with Tow Ball and Small Tow Ball Socket on Ends | Dark Bluish Gray | |  |
| 1 X Hinge Plate 1 x 2 Locking with 1 Finger On Top | Dark Bluish Gray | |  |
| 2 X Bar 1L with 1 x 1 Round Plate with Hollow Stud | Pearl Gold | |  |
| 4 X Tile, Modified 1 x 1 with Open O Clip | Pearl Gold | |  |
| 2 X Plate, Round 1 x 1 with Bar Handle on Side - Closed Ends | Pearl Gold | |  |
| 4 X Plate, Modified 1 x 2 with Bar Handle on Side - Free Ends | Pearl Gold | |  |
| 1 X Technic, Plate Rotor 3 Blade with Smooth Ends and 6 Studs (Propeller) | Dark Brown | |  |
| 1 X Plate, Round 2 x 2 with Axle Hole | Red | |  |
| 2 X Plate, Round 2 x 2 with Axle Hole | Black | |  |
| 6 X Tile, Round 2 x 2 with Bottom Stud Holder | Green | |  |
| 1 X Wedge, Plate 3 x 2 Left | Green | |  |
| 1 X Wedge, Plate 3 x 2 Right | Green | |  |
| 2 X Tile, Round 1 x 1 Quarter | Green | |  |
| 4 X Plate, Modified 4 x 4 with 3 x 3 Curved Cutout | Bright Green | |  |
| 2 X Plate, Round 2 x 2 with Axle Hole | Bright Green | |  |
| 4 X Tile, Round 1 x 1 Quarter | Bright Green | |  |
| 2 X Wedge, Plate 3 x 2 Right | Dark Blue | |  |
| 2 X Wedge, Plate 3 x 3 Cut Corner | Dark Blue | |  |
| 1 X Tile, Round 1 x 1 Quarter | Dark Blue | |  |
| 2 X Tile, Round 2 x 2 with Open Stud | Dark Blue | |  |
| 24 X Wedge, Plate 2 x 2 Cut Corner | Dark Blue | |  |
| 10 X Plate, Round 1 x 1 | Dark Blue | |  |
| 2 X Wedge, Plate 3 x 2 Left | Dark Blue | |  |
| 4 X Tile, Round 1 x 1 Quarter | Dark Bluish Gray | |  |
| 2 X Plate, Round 1 x 1 with Open Stud | Pearl Gold | |  |
| 11 X Plate, Round 2 x 2 with Axle Hole | Medium Azure | |  |
| 1 X Wedge, Plate 2 x 2 Right | Medium Azure | |  |
| 1 X Wedge, Plate 2 x 2 Left | Medium Azure | |  |
| 1 X Bar 6L with Stop Ring | Pearl Gold | |  |
| 1 X Barb / Claw / Horn / Tooth - Medium | Red | | |
| 1 X Barb / Claw / Horn / Tooth - Small | Pearl Gold | | |
| 1 X Wedge 4 x 3 Open with Cutout and 4 Studs | Dark Blue | |  |
| 3 X Plate, Modified 2 x 2 with Wheels Holder | Black | |  |
| 1 X Technic, Liftarm Thick 1 x 1 (Spacer) | Black | | |
| 1 X Minifigure, Weapon Sword, Shamshir/Katana (Square Guard) with Capped Pommel and Holes in Crossguard and Blade | Lime | | |
| 1 X Slope 30 1 x 1 x 2/3 | Green | | |
| 1 X Slope 45 1 x 1 x 2/3 Quadruple Convex Pyramid | Bright Green | | |
| 1 X Slope 30 1 x 1 x 2/3 | Dark Blue | | |
| 1 X Technic, Pin with Friction Ridges | Black | | |
| 1 X Minifigure, Weapon Harpoon, Smooth Shaft | Pearl Gold | | |
| 1 X Minifigure, Weapon Lightsaber Hilt Straight | Pearl Gold | | |
| 1 X Minifigure, Weapon Sword, Shamshir/Katana (Square Guard) with Capped Pommel and Holes in Crossguard and Blade | Flat Silver | | |
| 1 X Technic, Pin 1/2 without Friction Ridges | Light Bluish Gray | | |
| 1 X Technic Bush 1/2 Smooth | Light Bluish Gray | | |
| 1 X Plate 1 x 1 | Green | | |
| 1 X Tile 1 x 1 with Groove | Bright Green | | |
| 1 X Plate 1 x 1 | Dark Blue | | |
| 1 X Tile, Round 1 x 1 Quarter | Green | | |
| 1 X Bar 1L with 1 x 1 Round Plate with Hollow Stud | Pearl Gold | | |
| 1 X Tile, Round 1 x 1 Quarter | Bright Green | | |
| 1 X Tile, Round 1 x 1 Quarter | Dark Blue | | |
| 1 X Plate, Round 1 x 1 with Open Stud | Pearl Gold | | |
| 1 X Plate, Round 1 x 1 | Dark Blue | | |
| 1 X Tile, Round 1 x 1 Quarter | Dark Bluish Gray | | |
| 2 X Vehicle, Mudguard 3 x 4 x 1 2/3 Curved Front | Bright Green | |  |
| 2 X Wedge 3 x 4 x 2/3 Curved with Cutout | Bright Green | |  |
| 3 X Plate, Modified 1 x 3 with 2 Open O Clips on Top | Dark Bluish Gray | |  |
| 2 X Technic Rotation Joint Disk with Pin and 2 Small Rotation Joints | Black | |  |
| 4 X Technic, Brick Modified 2 x 2 with Ball Socket and Axle Hole - Straight Forks with Round Ends and Closed Sides | Black | |  |
| 2 X Technic, Axle Connector 2 x 3 with Ball Joint Socket - Closed Sides, Straight Forks with Closed Axle Holes | Dark Bluish Gray | |  |
| 1 X Sticker Sheet for Set 71766 - (82235/6369773) | (Not Applicable) | |  |
| 1 X Cloth Wing Dragon Left, Sand Green Ribs, Lime and Dark Green Scales Pattern | Green | |  |
| 1 X Cloth Wing Dragon Right, Medium Azure Ribs, Lime and Dark Green Scales Pattern | Green | |  |
| 1 X Bar 1L with Clip Mechanical Claw - Cut Edges and Hole on Side | Dark Bluish Gray | | |
| 1 X Minifigure, Weapon Sword, Shamshir/Katana (Square Guard) with Capped Pommel and Holes in Crossguard and Blade | Medium Azure | | |
| 1 X Minifigure Armor Shoulder Pad Single with Star Lettering and Scabbard for 1 Katana | Pearl Dark Gray | |  |
| 1 X Minifigure, Headgear Ninjago Wrap Type 4 with Lime Headband Pattern | Green | |  |
| 1 X Dragon Head (Ninjago) Jaw with 2 Bar Handles on Back - Closed Ends with White Teeth Pattern | Dark Blue | |  |
| 1 X Dragon Head (Ninjago) Jaw with Large Spike with Yellow Eyes, Dark Green Scales, and White Teeth Pattern | Bright Green | |  |
| 1 X Tile 2 x 3 with White Shuriken on Dark Turquoise Background, Red Frame with Gold Trim Pattern | Red | |  |
| 1 X Minifigure, Weapon Sword, Uruk-hai | Pearl Dark Gray | |  |
Отзывы о наборе LEGO 71766