名稱 | 顏色 | |
17 X Plate 1 x 6 | Light Bluish Gray |   | |
2 X Wedge, Plate 3 x 6 Cut Corners | Light Bluish Gray |   | |
4 X Technic, Gear 40 Tooth | Light Bluish Gray |   | |
3 X Technic, Axle 5 | Light Bluish Gray |   | |
4 X Technic, Plate 2 x 4 with 3 Holes | Light Bluish Gray |   | |
2 X Plate 2 x 4 | Light Bluish Gray |   | |
3 X Slope, Curved 2 x 4 x 2/3 No Studs with Bottom Tubes | Light Bluish Gray |   | |
2 X Tile 2 x 4 | Light Bluish Gray |   | |
3 X Hinge Plate 1 x 4 Swivel Top / Base | Light Bluish Gray |   | |
2 X Panel 1 x 4 x 5 with Window | Light Bluish Gray |   | |
4 X Technic, Brick 1 x 4 with Holes | Light Bluish Gray |   | |
2 X Tile 2 x 3 | Light Bluish Gray |   | |
6 X Plate 2 x 3 | Light Bluish Gray |   | |
5 X Wedge, Plate 2 x 4 | Light Bluish Gray |   | |
16 X Brick 1 x 3 | Light Bluish Gray |   | |
3 X Technic, Pin 1/2 with 2L Bar Extension (Flick Missile) | Light Bluish Gray |   | |
2 X Technic, Pin 3L with Friction Ridges Lengthwise and Stop Bush | Light Bluish Gray |   | |
2 X Plate, Modified 1 x 2 with Small Towball Socket on End | Light Bluish Gray |   | |
2 X Slope, Inverted 45 2 x 2 | Light Bluish Gray |   | |
2 X Slope, Curved 2 x 2 No Studs | Light Bluish Gray |   | |
2 X Plate 2 x 2 | Light Bluish Gray |   | |
7 X Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper) | Light Bluish Gray |   | |
2 X Technic Wedge Belt Wheel (Pulley) | Light Bluish Gray |   | |
2 X Bracket 1 x 2 - 2 x 2 | Light Bluish Gray |   | |
7 X Brick, Modified 1 x 2 x 1 2/3 with Studs on 1 Side | Light Bluish Gray |   | |
2 X Brick 1 x 2 x 2 with Inside Stud Holder | Light Bluish Gray |   | |
6 X Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper) | Light Bluish Gray |   | |
1 X Plate 1 x 2 | Light Bluish Gray |   | |
8 X Slope 45 2 x 1 with 2/3 Cutout | Light Bluish Gray |   | |
2 X Slope, Curved 2 x 1 Inverted | Light Bluish Gray |   | |
2 X Hinge Plate 1 x 2 Locking with 1 Finger On Top | Light Bluish Gray |   | |
5 X Plate, Modified 1 x 2 with Small Towball Socket on Side | Light Bluish Gray |   | |
4 X Slope 45 2 x 1 Double / Inverted - with Bottom Stud Holder | Light Bluish Gray |   | |
1 X Technic, Axle Connector with Axle Hole | Light Bluish Gray |   | |
3 X Brick, Round 2 x 2 with Axle Hole | Light Bluish Gray |   | |
4 X Technic, Pin without Friction Ridges Lengthwise | Light Bluish Gray |   | |
4 X Plate, Round 2 x 2 with Rounded Bottom (Boat Stud) | Light Bluish Gray |   | |
4 X Hinge Cylinder 1 x 2 Locking with 2 Fingers and Axle Hole on Ends | Light Bluish Gray |   | |
8 X Slope 45 2 x 1 Triple with Bottom Stud Holder | Light Bluish Gray |   | |
2 X Slope 30 1 x 2 x 2/3 | Light Bluish Gray |   | |
4 X Plate, Round 2 x 2 with Axle Hole | Light Bluish Gray |   | |
1 X Technic, Pin Connector Round 2L with Slot (Pin Joiner Round) | Light Bluish Gray |   | |
1 X Plate, Modified 1 x 1 with Tooth Horizontal | Light Bluish Gray |   | |
2 X Wheel 11mm D. x 8mm with Center Groove | Light Bluish Gray |   | |
4 X Plate, Modified 1 x 1 with Tooth Vertical | Light Bluish Gray |   | |
4 X Support 1 x 1 x 6 Solid Pillar | Light Bluish Gray |   | |
31 X Tile, Modified 1 x 1 with Clip - Rounded Edges | Light Bluish Gray |   | |
1 X Brick, Modified 1 x 1 with Stud on 1 Side | Light Bluish Gray |   | |
1 X Slope 30 1 x 1 x 2/3 | Light Bluish Gray |   | |
1 X Plate 1 x 1 | Light Bluish Gray |   | |
2 X Technic, Pin 1/2 | Light Bluish Gray |   | |
1 X Container, Bucket 1 x 1 x 1 | Light Bluish Gray |   | |
6 X Technic Bush 1/2 Smooth | Light Bluish Gray |   | |
1 X Cone 1 x 1 with Top Groove | Light Bluish Gray |   | |
2 X Bar 1L with Top Stud and 2 Side Studs | Light Bluish Gray |   | |
1 X Technic Bush 1/2 Smooth | Yellow |   | |
1 X Barb / Claw / Horn - Small | White |   | |
1 X Slope 30 1 x 1 x 2/3 | White |   | |
1 X Bone, Short | White |   | |
1 X Plate, Round 1 x 1 with Open Stud | White |   | |
3 X Barb / Claw / Horn - Large | White |   | |
1 X Minifigure, Plume Feather Triple Compact / Flame / Water | Trans-Orange |   | |
2 X Plate, Round 1 x 1 with Open Stud | Trans-Orange |   | |
1 X Slope 30 1 x 1 x 2/3 | Tan |   | |
1 X Slope 30 1 x 1 x 2/3 | Sand Green |   | |
1 X Plate, Round 1 x 1 Straight Side | Tan |   | |
1 X Tap 1 x 1 without Hole in Nozzle End | Red |   | |
1 X Minifigure, Weapon Lightsaber Hilt Straight | Pearl Dark Gray |   | |
1 X Barb / Claw / Horn - Small | Orange |   | |
2 X Bar 1L with Clip Mechanical Claw, Cut Edges and Hole on Side | Orange |   | |
1 X Tile, Round 1 x 1 with Gauge with Red Pointer Pattern | Flat Silver |   | |
1 X Technic, Pin Connector Round 2/3 L | Flat Silver |   | |
2 X Tile 1 x 1 with Groove (3070) | Dark Tan |   | |
1 X Barb / Claw / Horn - Small | Flat Silver |   | |
2 X Plate, Round 1 x 1 Straight Side | Flat Silver |   | |
1 X Barb / Claw / Horn - Small | Dark Tan |   | |
1 X Technic, Pin 1/2 | Blue |   | |
1 X Barb / Claw / Horn - Large | Black |   | |
1 X Technic, Pin with Friction Ridges Lengthwise WITH Center Slots | Black |   | |
1 X Minifigure, Weapon Sword, Shamshir/Katana (Square Guard) with Capped Pommel and Holes in Crossguard and Blade | Black |   | |
1 X Technic Ball Joint | Black |   | |
1 X Bar 3L (Bar Arrow) | Black |   | |
1 X Arm Mechanical, Battle Droid | Black |   | |
1 X Bar 1L with Clip Mechanical Claw, Cut Edges and Hole on Side | Black |   | |
2 X Chain 21 Links (16-17L) | Trans-Orange |   | |
2 X Wave Rounded with Base Rim (Castle Dragon Flame, Seaweed, Water) | Trans-Orange |   | |
5 X Minifigure, Plume Feather Triple Compact / Flame / Water | Trans-Orange |   | |
7 X Plate, Round 1 x 1 with Open Stud | Trans-Orange |   | |
3 X Cone 1 x 1 with Top Groove | Trans-Orange |   | |
3 X Brick, Round 1 x 1 Open Stud | Trans-Neon Orange |   | |
2 X Wave Rounded Large (Flame) with Marbled Trans-Yellow Pattern | Trans-Red |   | |
1 X Wedge 4 x 4 Pointed | Pearl Dark Gray |   | |
1 X Minifigure, Weapon Holder Ring (Ninjago Aeroblade Center) | Trans-Black |   | |
12 X Bar 1 x 4 x 6 with End Protrusions | Pearl Dark Gray |   | |
1 X Minifigure, Hand Armor | Pearl Dark Gray |   | |
2 X Brick, Round 1 x 1 d. 90 Degree Elbow - No Stud - Type 2 - Axle Hole | Pearl Dark Gray |   | |
2 X Bar 1L with Top Stud and 2 Side Studs | Pearl Dark Gray |   | |
1 X Minifigure, Weapon Lightsaber Hilt Straight | Pearl Dark Gray |   | |
2 X Plate, Modified 1 x 4 with Angled Tubes | Flat Silver |   | |
1 X Minifigure, Utensil Tool Spanner Wrench / Screwdriver | Flat Silver |   | |
1 X Fish | Flat Silver |   | |
3 X Tile, Modified 1 x 2 Grille with Bottom Groove / Lip | Flat Silver |   | |
2 X Barb / Claw / Horn - Small | Flat Silver |   | |
2 X Technic, Pin Connector Round 2/3 L | Flat Silver |   | |
1 X Tile, Round 1 x 1 with Gauge with Red Pointer Pattern | Flat Silver |   | |
36 X Plate, Round 1 x 1 Straight Side | Flat Silver |   | |
1 X Minifigure, Weapon Sword Hilt with Dragon Head | Pearl Gold |   | |
2 X Technic, Axle and Pin Connector Triple | Dark Brown |   | |
2 X Plate 2 x 10 | Reddish Brown |   | |
13 X Plate 1 x 10 | Reddish Brown |   | |
2 X Bar 7 x 3 with Double Clips (Ladder) | Reddish Brown |   | |
11 X Plate 2 x 4 | Reddish Brown |   | |
3 X Support 1 x 6 x 5 Girder Rectangular | Reddish Brown |   | |
1 X Minifigure, Utensil Push Broom | Reddish Brown |   | |
6 X Door Frame 1 x 4 x 6 with Two Holes on Top and Bottom | Reddish Brown |   | |
20 X Tile 1 x 4 | Reddish Brown |   | |
2 X Brick, Modified 1 x 4 Log | Reddish Brown |   | |
1 X Bar 4L (Lightsaber Blade / Wand) | Reddish Brown |   | |
2 X Container, Box 2 x 2 x 2 - Top Opening | Reddish Brown |   | |
1 X Tile, Modified 2 x 2 with Studs on Edge | Reddish Brown |   | |
6 X Plate, Modified 1 x 2 with Clip Horizontal on End | Reddish Brown |   | |
16 X Plate 1 x 2 | Reddish Brown |   | |
9 X Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper) | Reddish Brown |   | |
14 X Technic, Axle Connector 2L (Smooth with x Hole + Orientation) | Reddish Brown |   | |
6 X Brick, Round 2 x 2 with Flutes (Grille) and Axle Hole | Reddish Brown |   | |
10 X Plate, Modified 1 x 1 Rounded with Handle | Reddish Brown |   | |
2 X Bar 1L with Top Stud and 2 Side Studs | Reddish Brown |   | |
5 X Bar Holder with Clip | Reddish Brown |   | |
1 X Plate, Modified 2 x 3 Inverted with 4 Studs and Handle on Bottom - Closed Ends (Rocker Plate) | Dark Red |   | |
2 X Plant Flower Stem with Bar and 6 Stems | Dark Orange |   | |
2 X Turkey Drumstick, Short | Dark Orange |   | |
4 X Brick, Round 1 x 1 Open Stud | Dark Orange |   | |
14 X Plate, Modified 1 x 2 with Clips Horizontal (thick open O clips) | Medium Dark Flesh |   | |
12 X Technic, Brick 1 x 2 with Hole | Blue |   | |
9 X Technic, Axle Pin with Friction Ridges Lengthwise | Blue |   | |
1 X Technic, Pin 1/2 | Blue |   | |
7 X Plate 2 x 2 | Olive Green |   | |
16 X Plate 1 x 2 | Olive Green |   | |
6 X Slope 30 1 x 2 x 2/3 | Olive Green |   | |
16 X Arm Mechanical, Exo-Force / Bionicle, Thick Support | Olive Green |   | |
4 X Hero Factory Foot with Three Short Claws and Ball Socket | Sand Green |   | |
2 X Flag 2 x 2 Trapezoid | Sand Green |   | |
11 X Slope, Curved 2 x 1 No Studs | Sand Green |   | |
4 X Plate 1 x 2 | Sand Green |   | |
19 X Slope 30 1 x 1 x 2/3 | Sand Green |   | |
3 X Plate 6 x 16 | Dark Tan |   | |
1 X Plate 8 x 8 | Dark Tan |   | |
1 X Plate, Modified 6 x 8 Trap Door Frame Horizontal (Long Pin Holders) | Dark Tan |   | |
2 X Plate 1 x 8 | Dark Tan |   | |
2 X Brick 1 x 8 | Dark Tan |   | |
4 X Plate 2 x 6 | Dark Tan |   | |
4 X Wedge 6 x 2 Left | Dark Tan |   | |
4 X Wedge 6 x 2 Right | Dark Tan |   | |
7 X Brick 1 x 6 | Dark Tan |   | |
2 X Plate, Round Corner 2 x 6 Double | Dark Tan |   | |
17 X Brick 2 x 4 | Dark Tan |   | |
2 X Minifigure, Weapon Sword, Scimitar with Nicks | Dark Tan |   | |
2 X Slope, Curved 4 x 1 No Studs | Dark Tan |   | |
20 X Plate 1 x 4 | Dark Tan |   | |
2 X Plate 2 x 3 | Dark Tan |   | |
1 X Wedge, Plate 2 x 4 | Dark Tan |   | |
6 X Slope 33 3 x 1 | Dark Tan |   | |
6 X Tile 1 x 3 | Dark Tan |   | |
2 X Plate 1 x 3 | Dark Tan |   | |
10 X Slope 45 2 x 2 | Dark Tan |   | |
10 X Slope 65 2 x 2 x 2 with Bottom Tube | Dark Tan |   | |
4 X Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper) | Dark Tan |   | |
12 X Tile 2 x 2 with Groove | Dark Tan |   | |
2 X Wedge, Plate 8 x 3 Left | Dark Tan |   | |
2 X Wedge, Plate 8 x 3 Right | Dark Tan |   | |
1 X Wedge, Plate 6 x 3 Left | Dark Tan |   | |
1 X Wedge, Plate 6 x 3 Right | Dark Tan |   | |
2 X Plate, Modified 1 x 2 with Handle on Side - Free Ends | Dark Tan |   | |
6 X Brick 1 x 2 | Dark Tan |   | |
10 X Brick, Modified 1 x 2 with Masonry Profile (Brick Profile) | Dark Tan |   | |
2 X Slope, Curved 2 x 1 No Studs | Dark Tan |   | |
1 X Tile, Round 2 x 2 with Hole | Dark Tan |   | |
2 X Barb / Claw / Horn - Small | Dark Tan |   | |
2 X Brick 1 x 1 | Dark Tan |   | |
1 X Plate 4 x 12 | Black |   | |
14 X Tile 1 x 1 with Groove (3070) | Dark Tan |   | |
2 X Technic, Gear Rack 1 x 13 with Axle and Pin Holes | Black |   | |
2 X Large Figure Sword, Small with 3 Bar Holes | Black |   | |
1 X Technic, Axle 10 | Black |   | |
2 X Hinge Plate 1 x 8 with Angled Side Extensions, Squared Plate Underside | Black |   | |
2 X Technic, Axle 8 | Black |   | |
2 X Plate, Round 6 x 6 with Hole | Black |   | |
14 X Wedge, Plate 4 x 4 Cut Corner | Black |   | |
1 X Turntable 4 x 4 Square Base, Locking | Black |   | |
6 X Plate 4 x 4 | Black |   | |
4 X Plate 1 x 6 | Black |   | |
2 X Technic, Liftarm 1 x 7 Bent (4 - 4) Thick | Black |   | |
1 X Bracket 5 x 2 x 1 1/3 with 2 Holes | Black |   | |
2 X Bar 6L with Stop Ring | Black |   | |
1 X Bar 1 x 6 with Hollow Studs | Black |   | |
1 X Minifigure, Weapon Sword, Shamshir/Katana (Square Guard) with Capped Pommel and Holes in Crossguard and Blade | Black |   | |
1 X Technic, Brick Modified 2 x 2 with Pin Holes and 2 Rotation Joint Sockets | Black |   | |
18 X Slope 33 2 x 4 Double | Black |   | |
4 X Slope 33 3 x 3 Double Convex | Black |   | |
3 X Plate, Modified 1 x 4 with Angled Tubes | Black |   | |
6 X Slope 45 2 x 4 | Black |   | |
1 X Panel 1 x 4 x 3 with Side Supports - Hollow Studs | Black |   | |
4 X Slope 33 3 x 2 | Black |   | |
5 X Door 1 x 4 x 9 Arched Gate with Bars and Three Studs | Black |   | |
2 X Plate, Modified 2 x 2 with Wheels Holder | Black |   | |
5 X Plate, Modified 2 x 2 with Towball and Hole | Black |   | |
3 X Technic, Axle Pin 3L with Friction Ridges Lengthwise and 2L Axle | Black |   | |
1 X Minifigure, Weapon Bow with Arrow | Black |   | |
1 X Sticker for Set 70655 - (38838/6227684) | (Not Applicable) |   | |
4 X Slope 45 2 x 2 Double Convex | Black |   | |
2 X Slope, Curved 2 x 2 No Studs | Black |   | |
6 X Slope, Inverted 45 2 x 2 | Black |   | |
6 X Barb / Claw / Horn - Large | Black |   | |
2 X Hinge Plate 1 x 2 Locking with 1 Finger On End without Bottom Groove | Black |   | |
2 X Bar 3L (Bar Arrow) | Black |   | |
4 X Plate, Modified 1 x 2 with Handle on Side - Closed Ends | Black |   | |
1 X Plate, Modified 1 x 2 with Clips Horizontal (thick open O clips) | Black |   | |
1 X Minifigure, Weapon Gun, Blaster 1 x 2 x 2/3 with Studs on Sides and Handle | Black |   | |
2 X Brick, Modified Facet 2 x 2 | Black |   | |
5 X Technic, Brick 1 x 2 with Hole | Black |   | |
1 X Minifigure, Utensil Ingot / Bar | Black |   | |
2 X Arm Mechanical, Battle Droid | Black |   | |
2 X Technic, Pin with Friction Ridges Lengthwise WITH Center Slots | Black |   | |
1 X Brick, Modified 1 x 2 Log | Black |   | |
1 X Technic, Axle Connector Hub with Two Bar Holders (Lightsaber Hilt) | Black |   | |
1 X Brick, Round 2 x 2 Dome Bottom | Black |   | |
1 X Tile, Round 2 x 2 with Bottom Stud Holder | Black |   | |
1 X Technic, Axle and Pin Connector Angled #4 - 135 degrees | Black |   | |
3 X Technic, Pin with Friction Ridges Lengthwise and Towball | Black |   | |
1 X Minifigure, Ninja Face Scarf with Notch in Back | Black |   | |
8 X Brick, Modified 1 x 1 with Headlight | Black |   | |
2 X Technic, Axle and Pin Connector Angled #1 | Black |   | |
2 X Technic Ball Joint | Black |   | |
4 X Bar 1L with Clip Mechanical Claw, Cut Edges and Hole on Side | Black |   | |
2 X Cone 1 x 1 with Top Groove | Black |   | |
1 X Minifigure, Utensil Tool Mallet / Hammer | Black |   | |
1 X Plate, Modified 4 x 4 with 2 x 2 Cutout | Yellow |   | |
1 X Technic, Axle 5 | Yellow |   | |
1 X Technic, Liftarm 1 x 4 Thin | Yellow |   | |
2 X Technic, Axle 3 | Yellow |   | |
2 X Technic Bush 1/2 Smooth | Yellow |   | |
4 X Technic, Axle Connector 2L (Smooth with x Hole + Orientation) | Yellow |   | |
1 X Human Tool, Brick and Axle Separator | Orange |   | |
3 X Bracket 1 x 2 - 2 x 2 | Orange |   | |
2 X Flag 2 x 2 Trapezoid | Orange |   | |
4 X Barb / Claw / Horn - Small | Orange |   | |
12 X Bar 1L with Clip Mechanical Claw, Cut Edges and Hole on Side | Orange |   | |
1 X Technic, Axle 6 | Red |   | |
5 X Technic, Axle 4 | Red |   | |
7 X Technic, Axle 2 Notched | Red |   | |
1 X Tap 1 x 1 without Hole in Nozzle End | Red |   | |
1 X Brick, Round 1 x 1 Open Stud | Red |   | |
2 X Plate 2 x 16 | Tan |   | |
13 X Brick 1 x 12 | Tan |   | |
4 X Plate 1 x 10 | Tan |   | |
1 X Brick 2 x 6 | Tan |   | |
2 X Tile, Modified 4 x 4 with Studs on Edge | Tan |   | |
4 X Tile 1 x 6 | Tan |   | |
10 X Brick, Arch 1 x 5 x 4 - Continuous Bow | Tan |   | |
4 X Plate 2 x 4 | Tan |   | |
23 X Brick 1 x 4 | Tan |   | |
7 X Brick, Modified 1 x 4 with 4 Studs on 1 Side | Tan |   | |
1 X Slope, Curved 4 x 1 Double No Studs | Tan |   | |
2 X Brick, Modified 1 x 4 x 1 1/3 No Studs, Curved Top | Tan |   | |
2 X Brick, Arch 1 x 3 x 3 | Tan |   | |
2 X Tile 1 x 3 | Tan |   | |
8 X Brick 2 x 2 Corner | Tan |   | |
20 X Brick 2 x 2 | Tan |   | |
4 X Slope 75 2 x 2 x 3 - Solid Studs | Tan |   | |
2 X Brick, Modified 1 x 2 with Handle | Tan |   | |
12 X Slope 45 2 x 1 | Tan |   | |
14 X Slope 75 2 x 1 x 3 - Hollow Stud | Tan |   | |
1 X Tile, Modified 1 x 2 with Handle | Tan |   | |
1 X Technic, Brick 1 x 2 with Hole | Tan |   | |
18 X Brick 1 x 2 x 2 with Inside Stud Holder | Tan |   | |
1 X Plate, Modified 1 x 2 with Clip Horizontal on Side | Tan |   | |
2 X Plate, Round 2 x 2 with Rounded Bottom (Boat Stud) | Tan |   | |
9 X Technic, Axle Pin without Friction Ridges Lengthwise | Tan |   | |
4 X Plate, Round 2 x 2 with Axle Hole | Tan |   | |
10 X Plate, Modified 1 x 1 with Clip Vertical - Type 4 (thick open O clip) | Tan |   | |
4 X Slope 30 1 x 1 x 2/3 | Tan |   | |
2 X Brick, Modified 1 x 1 with Stud on 1 Side | Tan |   | |
6 X Plate, Round 1 x 1 Straight Side | Tan |   | |
2 X Technic, Brick 1 x 10 with Holes | White |   | |
4 X Brick, Round 1 x 1 Open Stud | Tan |   | |
4 X Plate 1 x 8 | White |   | |
2 X Dinosaur Tail / Neck Middle Section with Pin | White |   | |
1 X Wedge, Plate 4 x 6 Cut Corners | White |   | |
2 X Vehicle, Mudguard 1 1/2 x 6 x 1 with Arch | White |   | |
2 X Bar 6L with Stop Ring | White |   | |
2 X Technic, Plate 2 x 4 with 3 Holes | White |   | |
7 X Bone, Long | White |   | |
2 X Plate 1 x 4 | White |   | |
1 X Plate, Modified 1 x 4 with 2 Studs without Groove | White |   | |
2 X Brick 2 x 3 | White |   | |
6 X Slope, Curved 3 x 1 No Studs | White |   | |
2 X Brick, Arch 1 x 3 x 2 Inverted | White |   | |
2 X Plate 1 x 3 | White |   | |
1 X Technic, Driving Ring Connector | White |   | |
1 X Plate, Modified 2 x 2 x 2/3 with 2 Studs on Side | White |   | |
2 X Slope, Curved 2 x 2 No Studs | White |   | |
46 X Barb / Claw / Horn - Large | White |   | |
2 X Hinge Plate 1 x 2 Locking with 1 Finger On End without Bottom Groove | White |   | |
1 X Flag 2 x 2 Trapezoid | White |   | |
1 X Torso Skeleton, Thick Shoulder Pins | White |   | |
14 X Plate, Modified 1 x 2 with Clip on Top | White |   | |
4 X Plate, Modified 1 x 2 with Pin Hole on Top | White |   | |
1 X Wedge, Plate 4 x 2 Right | White |   | |
4 X Tile, Modified 1 x 2 with 2 Teeth Vertical | White |   | |
1 X Wedge, Plate 4 x 2 Left | White |   | |
4 X Plate, Modified 1 x 1 with Clip Horizontal (thick open O clip) | White |   | |
6 X Bone, Short | White |   | |
4 X Barb / Claw / Horn - Small | White |   | |
8 X Plate, Modified 1 x 1 with Tooth Vertical | White |   | |
6 X Plate, Round 1 x 1 with Open Stud | White |   | |
6 X Slope 30 1 x 1 x 2/3 | White |   | |
2 X Cone 1 x 1 with Top Groove | White |   | |
4 X Tile, Round Corner 4 x 4 Macaroni Wide | Light Bluish Gray |   | |
2 X Technic, Axle 7 | Light Bluish Gray |   | |
2 X Plate 2 x 6 | Light Bluish Gray |   | |
1 X Wedge, Plate 4 x 6 Cut Corners | Light Bluish Gray |   | |
1 X Wedge 6 x 4 Triple Inverted Curved | Light Bluish Gray |   | |
4 X Brick 1 x 8 | Light Bluish Gray |   | |
5 X Plate 2 x 8 | Light Bluish Gray |   | |
1 X Technic, Plate 2 x 8 with 7 Holes | Light Bluish Gray |   | |
4 X Plate 6 x 6 | Light Bluish Gray |   | |
3 X Technic, Brick 1 x 10 with Holes | Light Bluish Gray |   | |
2 X Plate 1 x 12 | Light Bluish Gray |   | |
2 X Plate 6 x 12 | Light Bluish Gray |   | |
1 X Technic, Pin without Friction Ridges Lengthwise | Light Bluish Gray |   | |
1 X Technic, Pin 1/2 | Light Bluish Gray |   | |
1 X Plate 1 x 1 | Light Bluish Gray |   | |
1 X Slope 30 1 x 1 x 2/3 | Light Bluish Gray |   | |
1 X Technic Bush 1/2 Smooth | Light Bluish Gray |   | |
1 X Slope, Curved 4 x 1 No Studs with Dragon Eye Pattern Model Left | Light Bluish Gray |   | |
1 X Slope, Curved 4 x 1 No Studs with Dragon Eye Pattern Model Right | Light Bluish Gray |   | |
2 X Cloth Flag 6.5 x 4 Wave with Dark Red Triangles and Dark Tan Lines on Tan Background Pattern | (Not Applicable) |   | |
1 X Dish 4 x 4 Inverted (Radar) with Solid Stud with Dragon Orange and White Pattern | Black |   | |
1 X Minifigure, Utensil Tool Chainsaw Blade | Dark Bluish Gray |   | |
4 X Technic, Gear 8 Tooth Type 2 | Dark Bluish Gray |   | |
19 X Slope 30 1 x 1 x 2/3 | Dark Bluish Gray |   | |
6 X Support 1 x 1 x 6 Solid Pillar | Dark Bluish Gray |   | |
2 X Minifigure, Utensil Space Gun / Torch - Without Grooves | Dark Bluish Gray |   | |
4 X Brick, Modified 1 x 1 with Studs on 2 Sides, Opposite | Dark Bluish Gray |   | |
4 X Road Sign Clip-On 2 x 2 Square Open O Clip | Dark Bluish Gray |   | |
1 X Pneumatic Hose Connector with Axle Connector | Dark Bluish Gray |   | |
6 X Wedge, Plate 2 x 2 Left | Dark Bluish Gray |   | |
2 X Wedge, Plate 2 x 2 Right | Dark Bluish Gray |   | |
3 X Wedge, Plate 4 x 2 Right | Dark Bluish Gray |   | |
8 X Brick, Modified 1 x 1 with Clip Vertical (open O clip) - Hollow Stud | Dark Bluish Gray |   | |
1 X Wedge, Plate 4 x 2 Left | Dark Bluish Gray |   | |
2 X Slope 45 2 x 1 Double - with Bottom Stud Holder | Dark Bluish Gray |   | |
3 X Slope 45 2 x 1 Triple with Bottom Stud Holder | Dark Bluish Gray |   | |
4 X Slope 30 1 x 2 x 2/3 | Dark Bluish Gray |   | |
5 X Tile, Round 2 x 2 with Bottom Stud Holder | Dark Bluish Gray |   | |
3 X Plate, Modified 1 x 2 with Towball on Side | Dark Bluish Gray |   | |
4 X Slope, Inverted 45 2 x 1 | Dark Bluish Gray |   | |
2 X Tile, Modified 1 x 2 Grille with Bottom Groove / Lip | Dark Bluish Gray |   | |
5 X Technic, Brick 1 x 2 with Axle Hole | Dark Bluish Gray |   | |
1 X Minifigure, Utensil Loudhailer / Megaphone / SW Blaster | Dark Bluish Gray |   | |
7 X Bracket 1 x 2 - 1 x 2 Inverted | Dark Bluish Gray |   | |
4 X Plate, Modified 1 x 2 with Door Rail | Dark Bluish Gray |   | |
1 X Slope, Inverted 45 3 x 1 Double | Dark Bluish Gray |   | |
11 X Plate, Modified 1 x 2 with Handle on Side - Closed Ends | Dark Bluish Gray |   | |
2 X Plate, Modified 1 x 2 with Clip Horizontal on End | Dark Bluish Gray |   | |
2 X Plate, Modified 1 x 2 with 3 Claws / Rock Fingers | Dark Bluish Gray |   | |
4 X Technic Rotation Joint Ball Loop with Two Perpendicular Pins with Friction | Dark Bluish Gray |   | |
1 X Wedge, Plate 8 x 3 Right | Dark Bluish Gray |   | |
1 X Wedge, Plate 8 x 3 Left | Dark Bluish Gray |   | |
1 X Chain 5 Links | Dark Bluish Gray |   | |
2 X Wedge, Plate 12 x 3 Left | Dark Bluish Gray |   | |
2 X Wedge, Plate 12 x 3 Right | Dark Bluish Gray |   | |
4 X Tile, Modified 2 x 2 Inverted | Dark Bluish Gray |   | |
1 X Vehicle, Air Scoop Top 2 x 2 | Dark Bluish Gray |   | |
2 X Tile 2 x 2 with Groove | Dark Bluish Gray |   | |
2 X Slope 45 2 x 2 | Dark Bluish Gray |   | |
2 X Brick, Modified 2 x 2 x 2/3 Two Studs, Curved Slope End | Dark Bluish Gray |   | |
2 X Slope 45 2 x 2 Double Convex | Dark Bluish Gray |   | |
8 X Plate, Modified 1 x 2 with Handle on End - Closed Ends | Dark Bluish Gray |   | |
7 X Technic, Gear 24 Tooth (2nd Version - 1 Axle Hole) | Dark Bluish Gray |   | |
2 X Tile 1 x 3 | Dark Bluish Gray |   | |
9 X Wedge, Plate 2 x 4 | Dark Bluish Gray |   | |
5 X Plate 2 x 3 | Dark Bluish Gray |   | |
4 X Slope 33 3 x 2 | Dark Bluish Gray |   | |
2 X Technic, Brick Modified 2 x 2 with Pin Hole, Rotation Joint Socket | Dark Bluish Gray |   | |
1 X Brick, Modified 2 x 2 with Pins and Axle Hole | Dark Bluish Gray |   | |
2 X Technic, Brick Modified 2 x 2 with Ball and Axle Hole with 6 Holes in Ball | Dark Bluish Gray |   | |
3 X Brick, Modified 2 x 3 x 2/3 Two Studs, Wing End | Dark Bluish Gray |   | |
4 X Slope, Curved 4 x 1 Double No Studs | Dark Bluish Gray |   | |
8 X Technic, Brick 1 x 4 with Holes | Dark Bluish Gray |   | |
2 X Slope 18 4 x 1 | Dark Bluish Gray |   | |
2 X Slope 45 2 x 4 | Dark Bluish Gray |   | |
4 X Technic, Brick Modified 2 x 2 with Pin Holes and Rotation Joint Ball Half (Vertical Side) | Dark Bluish Gray |   | |
2 X Plate, Round 4 x 4 with Hole | Dark Bluish Gray |   | |
3 X Bracket 1 x 2 - 2 x 4 | Dark Bluish Gray |   | |
1 X Tile, Modified 2 x 3 with 2 Clips (thick open O clips) | Dark Bluish Gray |   | |
1 X Wedge, Plate 3 x 4 with Stud Notches | Dark Bluish Gray |   | |
4 X Wedge, Plate 3 x 3 Cut Corner | Dark Bluish Gray |   | |
2 X Hinge Plate 1 x 4 Swivel Top / Base | Dark Bluish Gray |   | |
3 X Technic, Plate 2 x 4 with 3 Holes | Dark Bluish Gray |   | |
4 X Wedge, Plate A-Shape with 2 Rows of 4 Studs | Dark Bluish Gray |   | |
1 X Wedge 4 x 4 Fractured Polygon Top | Dark Bluish Gray |   | |
2 X Plate 4 x 4 | Dark Bluish Gray |   | |
4 X Brick, Round Corner 4 x 4 Macaroni Wide with 3 Studs | Dark Bluish Gray |   | |
1 X Wedge, Plate 4 x 6 Cut Corners | Dark Bluish Gray |   | |
1 X Plate, Modified 4 x 6 with Trap Door Hinge (Long Pins) | Dark Bluish Gray |   | |
2 X Plate 1 x 8 | Dark Bluish Gray |   | |
2 X Plate 4 x 6 | Dark Bluish Gray |   | |
4 X Plate 6 x 6 | Dark Bluish Gray |   | |
2 X Slope, Curved 5 x 8 x 2/3 | Dark Bluish Gray |   | |
1 X Plate 2 x 10 | Dark Bluish Gray |   | |
1 X Plate, Modified 10 x 10 Octagonal with Hole | Dark Bluish Gray |   | |
6 X Plate 2 x 12 | Dark Bluish Gray |   | |
3 X Plate, Modified 8 x 8 with Grille and Hole in Center | Dark Bluish Gray |   | |
2 X Plate 4 x 12 | Dark Bluish Gray |   | |
1 X Plate 6 x 12 | Dark Bluish Gray |   | |
1 X Minifigure, Shield Round with Rounded Front with Dragon and Decorative Lines White and Gold Pattern | Pearl Gold |   | |
1 X Minifigure, Weapon Sword, Blade with Bar and Spike on Top, Marbled Flat Silver Pattern | Tan |   | |
2 X Technic, Link 1 x 6 without Stoppers | Dark Bluish Gray |   | |
1 X Slope 30 1 x 1 x 2/3 | Dark Bluish Gray |   | |
2 X Minifigure, Weapon Hook with Bar | Flat Silver |   | |
1 X Minifigure, Weapon Hook with Double Blades | Flat Silver |   | |
2 X Minifigure, Weapon Sword Blade with Bar, Square Crossguard | Flat Silver |   | |
2 X Minifigure, Weapon Knife with Flat Hilt End and Curved Blade, Cross Hatched Grip | Flat Silver |   | |
2 X Minifigure, Weapon Sword Curved Blade with Bar | Flat Silver |   | |
Отзывы о наборе LEGO 70655