名稱 | 顏色 | |
5 X Hose, Rigid 3mm D. 4L / 3.2cm | Dark Gray |   | |
4 X Plate, Round 2 x 2 with Axle Hole | Yellow |   | |
2 X Cone 2 x 2 x 2 - Completely Open Stud | Yellow |   | |
4 X Technic, Brick 1 x 2 with Holes | Black |   | |
2 X Tile, Modified 1 x 2 Grille with Bottom Groove / Lip | Light Gray |   | |
4 X Slope, Inverted 45 2 x 1 | Light Gray |   | |
4 X Propeller 2 Blade 9 Diameter | Black |   | |
2 X Wedge 4 x 4 Triple Inverted | Light Gray |   | |
2 X Technic, Gear 16 Tooth (Old Style with Round Holes) | Light Gray |   | |
2 X Technic, Gear 24 Tooth Crown (Undetermined Type) | Light Gray |   | |
4 X Plate 1 x 4 | Yellow |   | |
2 X Wedge, Plate 3 x 4 without Stud Notches | Yellow |   | |
4 X Technic, Brick 1 x 4 with Holes | Black |   | |
13 X Technic, Axle 4 | Black |   | |
6 X Technic, Liftarm 1 x 3 Thin | Black |   | |
1 X Technic, Gear 24 Tooth (Old Style with Three Axle Holes) | Light Gray |   | |
5 X Technic, Gear 8 Tooth Type 1 | Light Gray |   | |
5 X Technic, Axle 12 | Black |   | |
4 X Technic Bush | Light Gray |   | |
4 X Plate 1 x 10 | Yellow |   | |
2 X Slope 45 2 x 1 | Black |   | |
1 X Plate 1 x 1 | Trans-Green |   | |
1 X Plate 1 x 1 | Trans-Red |   | |
12 X Technic, Liftarm 1 x 3 Thin | Yellow |   | |
5 X Technic, Axle 8 | Black |   | |
8 X Technic, Axle 10 | Black |   | |
6 X Technic Pole Reverser Handle | Light Gray |   | |
2 X Slope 33 3 x 2 | Black |   | |
8 X Technic Slope Long (Wing Back) | Black |   | |
20 X Plate 1 x 4 | Black |   | |
7 X Technic, Axle Connector 2L (Ridged Undetermined Type) | Light Gray |   | |
1 X Technic, Plate 2 x 4 with 3 Holes | Yellow |   | |
2 X Plate 1 x 1 | Yellow |   | |
1 X Sticker for Set 8425 - (4100330) | (Not Applicable) |   | |
20 X Technic, Pin 1/2 | Light Gray |   | |
2 X Plate 1 x 3 | Black |   | |
2 X Tile 1 x 2 with Groove | Black |   | |
2 X Technic Engine Crankshaft | Light Gray |   | |
2 X Technic, Plate 1 x 5 with Toothed Ends, 2 Studs and Center Axle Hole | Light Gray |   | |
4 X Plate 2 x 2 | Black |   | |
9 X Technic, Axle 2 | Black |   | |
1 X Tile 2 x 2 with Groove | Black |   | |
1 X Hinge Brick 1 x 2 Top Plate Thin | Black |   | |
1 X Hinge Brick 1 x 2 Base | Black |   | |
3 X Technic, Axle and Pin Connector | Light Gray |   | |
4 X Slope 33 3 x 1 | Black |   | |
8 X Technic, Liftarm 1 x 3 Thin | Light Gray |   | |
1 X Slope 45 2 x 4 | Black |   | |
6 X Technic, Brick 1 x 6 with Holes | Black |   | |
8 X Technic, Axle Pin without Friction Ridges Lengthwise | Light Gray |   | |
1 X Wedge, Plate 7 x 6 without Stud Notches (Boat Bow Plate) | Black |   | |
5 X Plate 1 x 2 | Yellow |   | |
2 X Technic, Axle 3 with Stud | Dark Gray |   | |
2 X Tile 1 x 4 | Black |   | |
14 X Technic, Brick 1 x 2 with Hole | Black |   | |
8 X Technic, Pin 3/4 | Dark Gray |   | |
8 X Technic, Liftarm 1 x 4 Thin with Stud Connector | Black |   | |
10 X Technic, Axle and Pin Connector Perpendicular | Light Gray |   | |
8 X Technic, Liftarm 1 x 4 Thin with Stud Connector | Light Gray |   | |
5 X Technic, Axle 6 | Black |   | |
11 X Technic, Axle 3 | Black |   | |
2 X Technic, Brick 1 x 4 with Holes | Light Gray |   | |
1 X Technic, Pin with Friction Ridges Lengthwise and Towball | Black |   | |
36 X Technic Bush 1/2 Toothed Type I | Light Gray |   | |
3 X Technic, Brick 1 x 8 with Holes | Black |   | |
4 X Plate 1 x 6 | Black |   | |
6 X Plate 2 x 2 Corner | Black |   | |
1 X Tile, Modified 1 x 1 with Clip | Light Gray |   | |
4 X Slope, Inverted 33 3 x 1 | Black |   | |
7 X Technic, Pin 3L with Friction Ridges Lengthwise | Black |   | |
10 X Technic, Brick 1 x 16 with Holes | Black |   | |
14 X Technic, Pin with Friction Ridges Lengthwise WITH Center Slots | Black |   | |
2 X Technic, Brick 1 x 12 with Holes | Black |   | |
1 X Arm Piece with Pin, 2 Fingers | Black |   | |
4 X Hinge Plate 1 x 4 Swivel Top / Base Complete Assembly | Yellow |   | |
1 X Technic, Brick 1 x 10 with Holes | Black |   | |
1 X Technic, Liftarm 1 x 9 Bent (6 - 4) Thick | Black |   | |
2 X Plate 1 x 6 | Yellow |   | |
4 X Hinge Plate 1 x 4 Swivel Top / Base Complete Assembly | Black |   | |
1 X Arm Piece with Pin, 3 Fingers | Black |   | |
6 X Technic, Liftarm Triangle Thin | Black |   | |
2 X Plate, Modified 2 x 2 with Pin Hole | Black |   | |
7 X Plate 1 x 2 | Black |   | |
9 X Technic, Plate 2 x 4 with 3 Holes | Black |   | |
1 X Wedge, Plate 8 x 4 Wing Left | Black |   | |
1 X Wedge, Plate 8 x 4 Wing Right | Black |   | |
2 X Technic, Plate 1 x 5 with Toothed Ends, 2 Studs and Center Axle Hole | Black |   | |
2 X Technic, Plate 1 x 8 with Toothed Ends | Black |   | |
2 X Technic, Axle Towball | Light Gray |   | |
1 X Rubber Belt Medium (Round Cross Section) - Approx. 3 x 3 | Red |   | |
4 X Wheel with Split Axle hole | Yellow |   | |
4 X Tire 24mm D. x 8mm Offset Tread | Black |   | |
2 X Plate, Round 2 x 2 with Rounded Bottom (Boat Stud) | Black |   | |
1 X Plate, Round 2 x 2 with Axle Hole | Black |   | |
1 X Slope 65 2 x 2 x 2 Smooth without Bottom Tube with Gauges and Diagonal Yellow Stripes Pattern Model Right Side (Stickers) - Set 8425 | Black |   | |
2 X Slope 65 2 x 2 x 2 Smooth without Bottom Tube | Black |   | |
1 X Technic Slope Long with Yellow '8' and Bent Stripes Pattern Model Right (Sticker) - Set 8425 | Black |   | |
1 X Technic Slope Long with Yellow '8' and Bent Stripes Pattern Model Left (Sticker) - Set 8425 | Black |   | |
1 X Tile 2 x 2 with Avionics Helicopter Controls Pattern (Sticker) - Set 8425 | Black |   | |
2 X Propeller 3 Blade 3 Diameter | Yellow |   | |
13 X Technic, Gear 12 Tooth Bevel | Light Gray |   | |
4 X Wheel with Split Axle hole, with Black Tire Offset Tread (3482 / 3483) | Yellow |   | |
1 X Slope 65 2 x 2 x 2 Smooth without Bottom Tube with Gauges and Diagonal Yellow Stripes Pattern Model Left Side (Stickers) - Set 8425 | Black |   | |
1 X Wedge 6 x 4 Inverted without Connections between Studs | Black |   | |
Отзывы о наборе LEGO 8425