| 名稱 | 顏色 |   | 
 
| 4 X Technic, Pin 1/2 | Light Bluish Gray  |    |   | 
 
| 1 X Technic, Pin 1/2 | Light Bluish Gray  |    |   | 
 
| 2 X Technic, Pin 1/2 with 2L Bar Extension (Flick Missile) | Light Bluish Gray  |    |   | 
 
| 2 X Technic, Plate Rotor 3 Blade with Smooth Ends and 6 Studs (Propeller) | Light Bluish Gray  |    |   | 
 
| 2 X Plate, Modified 1 x 2 with Clip Horizontal on End | Light Bluish Gray  |    |   | 
 
| 1 X Plate, Modified 1 x 2 with Arm Up (Horizontal Arm Length 5mm) | Light Bluish Gray  |    |   | 
 
| 1 X Plate 4 x 8 | Light Bluish Gray  |    |   | 
 
| 2 X Plate 2 x 8 | Light Bluish Gray  |    |   | 
 
| 2 X Wave Rounded with Base Rim (Castle Dragon Flame, Seaweed, Water) | Trans-Orange  |    |   | 
 
| 4 X Cone 1 x 1 with Top Groove | Trans-Orange  |    |   | 
 
| 1 X Wedge 4 x 4 Fractured Polygon Top | Dark Tan  |    |   | 
 
| 6 X Minifig, Weapon Sword, Scimitar with Nicks | Dark Tan  |    |   | 
 
| 3 X Wedge, Plate 3 x 2 Right | Dark Tan  |    |   | 
 
| 2 X Dish 4 x 4 Inverted (Radar) with Dark Bluish Gray and Dark Purple Snake and Geometric Pattern | Dark Tan  |    |   | 
 
| 3 X Wedge, Plate 3 x 2 Left | Dark Tan  |    |   | 
 
| 2 X Plate 2 x 6 | Dark Tan  |    |   | 
 
| 1 X Plate 2 x 4 | Dark Tan  |    |   | 
 
| 1 X Wedge 4 x 2 Triple Right | Dark Tan  |    |   | 
 
| 1 X Wedge 4 x 2 Triple Left | Dark Tan  |    |   | 
 
| 1 X Slope 30 1 x 1 x 2/3 | Dark Tan  |    |   | 
 
| 2 X Slope 30 1 x 1 x 2/3 | Dark Tan  |    |   | 
 
| 4 X Brick, Modified Facet 2 x 2 | Dark Tan  |    |   | 
 
| 2 X Brick, Modified 1 x 2 with Masonry Profile (Brick Profile) | Dark Tan  |    |   | 
 
| 2 X Cone 1 x 1 with Top Groove | Trans-Red  |    |   | 
 
| 1 X Plant Brick, Round 1 x 1 with 3 Bamboo Leaves | Green  |    |   | 
 
| 2 X Technic, Axle and Pin Connector Angled #5 - 112.5 degrees | Black  |    |   | 
 
| 1 X Slope, Curved 2 x 2 Lip, No Studs | Black  |    |   | 
 
| 1 X Tire 14mm D. x 4mm Smooth Small Single - New Style - with Number Molded on Side | Black  |    |   | 
 
| 2 X Tire 14mm D. x 4mm Smooth Small Single - New Style - with Number Molded on Side | Black  |    |   | 
 
| 1 X Minifig, Utensil Tool Spanner Wrench / Screwdriver | Black  |    |   | 
 
| 1 X Wedge, Plate 3 x 6 Cut Corners | Black  |    |   | 
 
| 2 X Hinge Plate 1 x 2 Locking with 1 Finger On End | Black  |    |   | 
 
| 1 X Plate, Modified 1 x 2 with Handle on Side - Closed Ends | Black  |    |   | 
 
| 10 X Tile, Modified 1 x 1 with Clip - Rounded Edges | Black  |    |   | 
 
| 1 X Technic, Pin with Friction Ridges Lengthwise WITH Center Slots | Black  |    |   | 
 
| 2 X Technic, Pin with Friction Ridges Lengthwise WITH Center Slots | Black  |    |   | 
 
| 2 X Plate 1 x 10 | Black  |    |   | 
 
| 1 X Tile 2 x 4 | Black  |    |   | 
 
| 4 X Plate 1 x 6 | Black  |    |   | 
 
| 1 X Plate 2 x 2 | Black  |    |   | 
 
| 2 X Tile, Modified 1 x 2 Grille with Bottom Groove / Lip | Black  |    |   | 
 
| 2 X Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper) | Black  |    |   | 
 
| 1 X Slope, Inverted 33 3 x 2 with Connections between Studs | Black  |    |   | 
 
| 3 X Technic, Brick 1 x 4 with Holes | Black  |    |   | 
 
| 4 X Technic, Brick 1 x 2 with Axle Hole | Black  |    |   | 
 
| 2 X Brick, Round 1 x 1 Open Stud | Black  |    |   | 
 
| 2 X Brick, Modified 1 x 1 with Clip Horizontal | Black  |    |   | 
 
| 1 X Brick 2 x 6 | Black  |    |   | 
 
| 2 X Technic Bush 1/2 Smooth | Yellow  |    |   | 
 
| 6 X Technic Bush 1/2 Smooth | Yellow  |    |   | 
 
| 2 X Technic, Axle Pin with Friction Ridges Lengthwise | Blue  |    |   | 
 
| 1 X Technic Bush | Red  |    |   | 
 
| 3 X Technic, Axle 2 Notched | Red  |    |   | 
 
| 2 X Technic Bush | Red  |    |   | 
 
| 1 X Technic, Axle and Pin Connector Perpendicular | Red  |    |   | 
 
| 1 X Hinge Brick 2 x 2 Top Plate Thin | Red  |    |   | 
 
| 2 X Plate, Modified 1 x 1 with Clip Vertical - Type 4 (thick open O clip) | Red  |    |   | 
 
| 1 X Tile 1 x 2 with Groove | Red  |    |   | 
 
| 2 X Technic, Axle 4 with Center Stop | Tan  |    |   | 
 
| 2 X Technic, Axle Pin without Friction Ridges Lengthwise | Tan  |    |   | 
 
| 1 X Slope 45 2 x 2 | Tan  |    |   | 
 
| 1 X Minifig, Weapon Sword, Serrated with Snake Skull Hilt and Dark Purple Blade Pattern | Tan  |    |   | 
 
| 1 X Hinge Brick 1 x 2 Base | White  |    |   | 
 
| 4 X Plate, Modified 1 x 1 with Tooth Horizontal | White  |    |   | 
 
| 1 X Barb / Claw / Horn - Large | White  |    |   | 
 
| 3 X Barb / Claw / Horn - Large | White  |    |   | 
 
| 1 X Barb / Claw / Horn - Small | White  |    |   | 
 
| 11 X Barb / Claw / Horn - Small | White  |    |   | 
 
| 2 X Torso Skeleton, Thin Shoulder Pins | White  |    |   | 
 
| 1 X Plate, Modified 1 x 2 with Handles - Flat Ends, Low Attachment | White  |    |   | 
 
| 2 X Hinge Plate 1 x 2 Locking with 2 Fingers On End | White  |    |   | 
 
| 1 X Plate, Modified 1 x 2 with Clips Horizontal (thick open O clips) | White  |    |   | 
 
| 8 X Plate, Modified 1 x 1 with Clip Vertical - Type 4 (thick open O clip) | White  |    |   | 
 
| 1 X Technic, Brick 1 x 2 with Holes | White  |    |   | 
 
| 1 X Technic, Pin without Friction Ridges Lengthwise | Light Bluish Gray  |    |   | 
 
| 1 X Technic, Pin without Friction Ridges Lengthwise | Light Bluish Gray  |    |   | 
 
| 1 X Technic, Axle Connector with Axle Hole | Light Bluish Gray  |    |   | 
 
| 1 X Technic, Axle 9 | Light Bluish Gray  |    |   | 
 
| 6 X Technic, Brick 1 x 2 with Hole | Dark Bluish Gray  |    |   | 
 
| 2 X Slope 30 1 x 1 x 2/3 | Dark Bluish Gray  |    |   | 
 
| 1 X Slope 30 1 x 1 x 2/3 | Dark Bluish Gray  |    |   | 
 
| 2 X Plate 2 x 2 Corner | Dark Bluish Gray  |    |   | 
 
| 1 X Plate 2 x 3 | Dark Bluish Gray  |    |   | 
 
| 2 X Plate 4 x 6 | Dark Bluish Gray  |    |   | 
 
| 2 X Plate, Modified 1 x 2 with Ladder | Dark Bluish Gray  |    |   | 
 
| 1 X Hinge Plate 2 x 4 with Articulated Joint - Male | Dark Bluish Gray  |    |   | 
 
| 1 X Hinge Plate 2 x 4 with Articulated Joint - Female | Dark Bluish Gray  |    |   | 
 
| 2 X Technic, Liftarm 1 x 7 Bent (4 - 4) Thick | Dark Bluish Gray  |    |   | 
 
| 2 X Technic, Axle Pin 3L with Friction Ridges Lengthwise and 1L Axle | Dark Bluish Gray  |    |   | 
 
| 2 X Wheel Hard Plastic with Small Cleats | Dark Bluish Gray  |    |   | 
 
| 2 X Technic, Axle 5.5 with Stop | Dark Bluish Gray  |    |   | 
 
| 4 X Slope 30 1 x 1 x 2/3 | Dark Purple  |    |   | 
 
| 1 X Slope 30 1 x 1 x 2/3 | Dark Purple  |    |   | 
 
| 6 X Slope, Curved 2 x 1 No Studs | Dark Purple  |    |   | 
 
| 9 X Plate 1 x 2 | Dark Purple  |    |   | 
 
| 2 X Brick, Modified 2 x 3 x 2/3 Two Studs, Wing End | Dark Purple  |    |   | 
 
| 1 X Plate, Modified 1 x 4 with Pin Hole and Bucket (Catapult) | Dark Brown  |    |   | 
 
| 1 X Sticker for Set 70745 - International Version - (19211/6097217) | (Not Applicable)  |   |   | 
 
| 1 X Technic, Pin Connector Plate 1 x 2 x 1 2/3 with 2 Holes (Double on Top) | Dark Bluish Gray  |    |   | 
 
| 1 X Wedge 4 x 2 Triple Right with Red and Black Eye Pattern (Sticker) - Set 70745 | Dark Tan  |    |   | 
 
| 1 X Wedge 4 x 2 Triple Left with Red and Black Eye Pattern (Sticker) - Set 70745 | Dark Tan  |    |   | 
 
| 1 X Tile 2 x 4 with Black 'CONDRAI 2000' on Silver Engine Pattern (Sticker) - Set 70745 | Black  |    |   | 
 
| 2 X Technic Bush 1/2 Smooth with Black Tire 14mm D. x 4mm Smooth Small Single - New Style with Number Molded on Side (4265c / 59895) | Yellow  |    |   | 
 
| 2 X Minifig, Weapon Sword, Shamshir (Square Guard) with Uncapped Pommel and Hole in Hilt | Pearl Gold  |    |   | 
Отзывы о наборе LEGO 70745