名稱 | 顏色 | |
2 X Tile, Round 1 x 1 | White | |  |
6 X Plate 1 x 1 | White | |  |
2 X Slope 30 1 x 1 x 2/3 | White | |  |
2 X Wedge 2 x 1 with Stud Notch Left | White | |  |
3 X Wedge, Plate 2 x 2 Left | White | |  |
3 X Wedge, Plate 2 x 2 Right | White | |  |
2 X Wedge 2 x 1 with Stud Notch Right | White | |  |
4 X Wedge, Plate 4 x 2 Left | White | |  |
4 X Wedge, Plate 4 x 2 Right | White | |  |
2 X Slope 30 1 x 2 x 2/3 | White | |  |
6 X Technic, Axle and Pin Connector Hub with 1 Axle | White | |  |
2 X Slope 45 2 x 1 Double / Inverted - with Bottom Stud Holder | White | |  |
4 X Slope 45 2 x 1 with 2/3 Cutout | White | |  |
2 X Slope 65 2 x 1 x 2 | White | |  |
4 X Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper) | White | |  |
4 X Technic, Pin Connector Round 2L with Slot (Pin Joiner Round) | White | |  |
4 X Brick, Modified 1 x 2 with Studs on 1 Side | White | |  |
2 X Plate, Modified 1 x 2 with Pin Hole on Top | White | |  |
4 X Slope 45 2 x 1 with Cutout without Stud | White | |  |
2 X Slope 18 2 x 1 x 2/3 with 4 Slots | White | |  |
4 X Plate, Modified 1 x 2 with Clip on Top | White | |  |
2 X Brick, Modified 1 x 2 x 1 2/3 with Studs on 1 Side | White | |  |
4 X Plate, Modified 1 x 2 with 3 Teeth (Claws) | White | |  |
15 X Bracket 1 x 2 - 2 x 2 Inverted | White | |  |
5 X Slope, Curved 2 x 2 | White | |  |
4 X Tile, Modified 2 x 2 with Pin | White | |  |
2 X Plate, Modified 2 x 2 with Pin Hole - Full Cross Support Underneath | White | |  |
4 X Slope, Curved 2 x 2 Lip | White | |  |
1 X Technic, Driving Ring Connector | White | |  |
7 X Tile, Modified 2 x 3 Pentagonal | White | |  |
1 X Wedge 2 x 4 Triple | White | |  |
4 X Plate, Modified 1 x 2 with Angled Bar Handles on Side | White | |  |
2 X Slope, Curved 3 x 2 | White | |  |
2 X Plate, Modified 1 x 2 with Racers Car Grille | White | |  |
8 X Slope, Curved 3 x 2 x 2/3 with Two Studs, Wing End | White | |  |
5 X Vehicle, Spoiler 2 x 4 with Bar Handle | White | |  |
3 X Wedge 4 x 2 Triple Right | White | |  |
8 X Slope, Curved 4 x 1 Inverted | White | |  |
2 X Plate 1 x 4 | White | |  |
6 X Technic, Brick Modified 2 x 2 with Ball Receptacle Wide and Axle Hole | White | |  |
4 X Dish 4 x 4 Inverted (Radar) with Solid Stud | White | |  |
3 X Wedge 4 x 2 Triple Left | White | |  |
1 X Wedge 3 x 4 with Stud Notches | White | |  |
1 X Technic, Brick 1 x 6 with Holes | White | |  |
2 X Wedge, Plate 4 x 4 Cut Corner | White | |  |
7 X Slope, Curved 10 x 1 | White | |  |
4 X Plate, Round 2 x 2 with Axle Hole | Tan | |  |
4 X Technic, Axle Pin without Friction Ridges Lengthwise | Tan | |  |
42 X Plate 1 x 2 | Tan | |  |
2 X Technic, Gear 20 Tooth Bevel | Tan | |  |
8 X Tile, Modified 2 x 2 with Studs on Edge | Tan | |  |
1 X Tile 2 x 3 | Tan | |  |
4 X Hinge Plate 1 x 4 Swivel Base with Same Color Hinge Plate 1 x 4 Swivel Top (2429 / 2430) | Tan | |  |
1 X Cone 1 x 1 with Top Groove | Red | |  |
1 X Technic, Axle and Pin Connector Angled #2 - 180 degrees | Red | |  |
2 X Technic, Bush | Red | |  |
1 X Technic, Axle 2 Notched | Red | |  |
1 X Tile, Round 2 x 2 with Hole | Red | |  |
4 X Brick 1 x 2 x 2 with Inside Stud Holder | Red | |  |
4 X Plate 2 x 2 | Red | |  |
8 X Technic, Axle Pin 3L with Friction Ridges Lengthwise and 1L Axle | Red | |  |
6 X Technic, Pin 1/2 | Blue | |  |
2 X Technic, Axle Pin with Friction Ridges Lengthwise | Blue | |  |
8 X Technic, Pin 3L with Friction Ridges Lengthwise | Blue | |  |
1 X Technic, Axle 3 | Yellow | |  |
4 X Plate 2 x 3 | Yellow | |  |
2 X Technic, Ball Joint with Through Axle Hole | Black | |  |
6 X Technic, Pin with Friction Ridges Lengthwise and Pin Hole | Black | |  |
6 X Cone 1 1/2 x 1 1/2 x 2/3 Truncated | Black | |  |
4 X Bracket 1 x 1 - 1 x 1 Inverted | Black | |  |
1 X Technic, Gear 12 Tooth Double Bevel | Black | |  |
2 X Plate, Modified 1 x 1 Rounded with Bar Handle | Black | |  |
2 X Slope 30 1 x 2 x 2/3 | Black | |  |
19 X Technic, Pin with Friction Ridges Lengthwise, Staggered, with or without Center Slots | Black | |  |
4 X Minifigure, Utensil Ingot / Bar | Black | |  |
8 X Bracket 1 x 2 - 2 x 2 Inverted | Black | |  |
5 X Plate, Modified 1 x 2 with 2 Open O Clips (Horizontal Grip) | Black | |  |
1 X Technic, Pin Double Triangle 1 x 3 with 2 Clips with Squared Pin Holes | Black | |  |
6 X Technic, Rotation Joint Ball Loop with Two Perpendicular Pins with Friction | Black | |  |
4 X Technic, Axle Pin 3L with Friction Ridges Lengthwise and 2L Axle | Black | |  |
1 X Technic, Pin 3L with Friction Ridges Lengthwise and Stop Bush | Black | |  |
2 X Slope, Inverted 33 3 x 2 with Connections between Studs | Black | |  |
3 X Brick, Modified 1 x 4 Log | Black | |  |
1 X Plate, Modified 2 x 2 with Bar Frame Octagonal, Reinforced, Completely Round Studs | Black | |  |
3 X Plate 1 x 4 | Black | |  |
2 X Plate, Round 4 x 4 with Hole | Black | |  |
1 X Plate 2 x 8 | Black | |  |
1 X Plate 4 x 8 | Black | |  |
1 X Plate, Round 2 x 2 with Rounded Bottom (Boat Stud) | Trans-Clear | |  |
1 X Plastic Flag Tattered with Scroll of Forbidden Spinjitzu Pattern, Sheet of 3 | (Not Applicable) | |  |
2 X Bar 4L (Lightsaber Blade / Wand) | Trans-Red | |  |
1 X Human Tool, Brick and Axle Separator | Orange | |  |
2 X Brick 2 x 2 | Lime | |  |
1 X Plate 2 x 2 Corner | Lime | |  |
18 X Bracket 1 x 2 - 1 x 2 Inverted | Dark Tan | |  |
4 X Plate 2 x 2 Corner | Dark Tan | |  |
8 X Plate, Modified 1 x 2 with Bar Handle on End - Closed Ends | Dark Tan | |  |
2 X Wedge 2 x 1 with Stud Notch Left | Sand Green | |  |
6 X Plate, Modified 1 x 1 with Tooth Horizontal | Sand Green | |  |
2 X Wedge 2 x 1 with Stud Notch Right | Sand Green | |  |
4 X Wedge, Plate 2 x 2 Cut Corner | Sand Green | |  |
8 X Plate, Modified 1 x 2 with Clip on Top | Sand Green | |  |
2 X Slope 18 2 x 1 x 2/3 with 4 Slots | Sand Green | |  |
2 X Slope, Curved 2 x 1 | Sand Green | |  |
2 X Slope 45 2 x 1 | Sand Green | |  |
2 X Flag 2 x 2 Trapezoid | Sand Green | |  |
4 X Slope, Curved 2 x 2 | Sand Green | |  |
4 X Plate, Modified 2 x 2 x 2/3 with 2 Studs on Side | Sand Green | |  |
2 X Tile 1 x 3 | Sand Green | |  |
9 X Tile, Modified 2 x 3 Pentagonal | Sand Green | |  |
2 X Wedge 2 x 4 Triple | Sand Green | |  |
7 X Wedge, Plate 2 x 4 | Sand Green | |  |
5 X Slope, Curved 4 x 1 | Sand Green | |  |
7 X Wedge 4 x 4 Pointed | Sand Green | |  |
2 X Brick, Modified 1 x 1 x 1 2/3 with Studs on 1 Side | Reddish Brown | |  |
2 X Slope, Curved 2 x 1 | Reddish Brown | |  |
9 X Bracket 1 x 2 - 2 x 2 | Reddish Brown | |  |
13 X Plate 2 x 2 | Reddish Brown | |  |
14 X Plate 2 x 4 | Reddish Brown | |  |
2 X Technic, Axle 5 with Stop | Reddish Brown | |  |
5 X Tile, Modified 1 x 1 with Open O Clip | Light Bluish Gray | |  |
6 X Technic, Axle and Pin Connector Angled #3 - 157.5 degrees | Light Bluish Gray | |  |
2 X Hinge Brick 1 x 2 Top | Light Bluish Gray | |  |
4 X Brick, Modified 1 x 2 x 1 2/3 with Studs on 1 Side | Light Bluish Gray | |  |
4 X Technic, Gear 20 Tooth Bevel with Pin Hole | Light Bluish Gray | |  |
16 X Bracket 1 x 2 - 1 x 2 | Light Bluish Gray | |  |
4 X Wheel 18mm D. x 8mm with Fake Bolts and Deep Spokes with Inner Ring | Light Bluish Gray | |  |
4 X Plate, Modified 1 x 2 with Clip on End (Horizontal Grip) | Light Bluish Gray | |  |
2 X Tile, Modified 2 x 2 Inverted | Light Bluish Gray | |  |
12 X Slope, Curved 2 x 2 Inverted | Light Bluish Gray | |  |
2 X Plate, Modified 3 x 2 with Hole | Light Bluish Gray | |  |
7 X Bracket 1 x 2 - 2 x 4 | Light Bluish Gray | |  |
3 X Wedge, Plate 2 x 4 | Light Bluish Gray | |  |
2 X Projectile Launcher, Spring Shooter with Light Bluish Gray Top | Dark Bluish Gray | |  |
6 X Technic, Plate 2 x 4 with 3 Holes | Light Bluish Gray | |  |
1 X Technic, Liftarm 3 X 5 Perpendicular H-Shape Thick | Light Bluish Gray | |  |
2 X Technic, Rotation Joint Disk with Pin and 3L Liftarm Thick | Light Bluish Gray | |  |
4 X Plate 2 x 6 | Light Bluish Gray | |  |
1 X Tile, Round 1 x 1 Quarter | Dark Bluish Gray | |  |
2 X Bracket 1 x 1 - 1 x 1 Inverted | Dark Bluish Gray | |  |
10 X Plate, Round 2 x 2 with Rounded Bottom (Boat Stud) | Dark Bluish Gray | |  |
2 X Tile, Round 2 x 2 with Hole with Rotor Blade Pattern | Dark Bluish Gray | |  |
2 X Slope 30 1 x 2 x 2/3 with Green Gauges and Radar Screen on Black Background Pattern | Dark Bluish Gray | |  |
6 X Brick, Modified 1 x 2 with Grille (Flutes) | Dark Bluish Gray | |  |
4 X Slope 45 2 x 1 with Cutout without Stud | Dark Bluish Gray | |  |
12 X Technic, Brick 1 x 2 with Holes | Dark Bluish Gray | |  |
2 X Technic, Pin Connector Plate 1 x 2 x 1 2/3 with 2 Holes (Double on Top) | Dark Bluish Gray | |  |
4 X Brick, Modified Facet 2 x 2 | Dark Bluish Gray | |  |
4 X Hero Factory Arm / Leg Extender with Ball Joint and Ball Socket | Dark Bluish Gray | |  |
4 X Plate, Modified 1 x 2 with Bar Handle on Side with Free Ends | Dark Bluish Gray | |  |
4 X Hinge Plate 1 x 2 Locking with 1 Finger On End without Bottom Groove | Dark Bluish Gray | |  |
1 X Tile, Modified 2 x 2 with Pin | Dark Bluish Gray | |  |
4 X Slope, Inverted 45 2 x 2 | Dark Bluish Gray | |  |
1 X Technic, Axle 4 with Stop | Dark Bluish Gray | |  |
2 X Technic, Brick Modified 2 x 2 with Pin Hole, Rotation Joint Socket | Dark Bluish Gray | |  |
4 X Technic, Brick Modified 2 x 2 with Ball and Axle Hole with 6 Holes in Ball | Dark Bluish Gray | |  |
4 X Plate, Modified 1 x 4 with 2 Studs with Groove | Dark Bluish Gray | |  |
3 X Technic, Brick 1 x 4 with Holes | Dark Bluish Gray | |  |
2 X Technic, Brick Modified 2 x 2 with Pin Hole, Rotation Joint Ball Half (Horizontal Top) | Dark Bluish Gray | |  |
4 X Technic, Brick Modified 2 x 2 with Pin Holes and Rotation Joint Ball Half (Vertical Side) | Dark Bluish Gray | |  |
1 X Plate 2 x 4 | Dark Bluish Gray | |  |
1 X Wedge 4 x 4 Triple Inverted with Connections between 4 Studs | Dark Bluish Gray | |  |
2 X Technic, Rotation Joint Disk with Pin Hole and 3L Liftarm Thick | Dark Bluish Gray | |  |
4 X Slope, Curved 6 x 1 | Dark Bluish Gray | |  |
2 X Plate 4 x 4 Corner | Dark Bluish Gray | |  |
2 X Technic, Liftarm 1 x 9 Thick | Dark Bluish Gray | |  |
2 X Chain with Tassel | Pearl Gold | |  |
2 X Bar Holder with Clip | Pearl Gold | |  |
2 X Minifigure, Weapon Sword Hilt with Dragon Head | Pearl Gold | |  |
2 X Plate, Round 1 x 1 with Flower Edge (5 Petals) | Pearl Gold | |  |
1 X Minifigure, Weapon Sword, Saber/Dao Curved Blade and Hilt with Bar End | Pearl Gold | |  |
16 X Plate, Round 1 x 1 with Open Stud | Pearl Gold | |  |
3 X Tile, Round 1 x 1 with Bar and Pin Holder | Pearl Gold | |  |
2 X Tile, Modified 1 x 1 with Open O Clip | Pearl Gold | |  |
4 X Plate, Modified 1 x 1 with Tooth Vertical | Pearl Gold | |  |
8 X Arm Mechanical, Exo-Force / Bionicle, Thick Support | Pearl Gold | |  |
1 X Plate, Modified 1 x 1 with Open O Clip (Horizontal Grip) | Pearl Gold | |  |
6 X Plate, Modified 1 x 1 Rounded with Bar Handle | Pearl Gold | |  |
2 X Slope 45 2 x 1 Triple with Bottom Stud Holder | Pearl Gold | |  |
4 X Tile, Round 2 x 2 with Bottom Stud Holder | Pearl Gold | |  |
4 X Brick, Round 2 x 2 with Flutes (Grille) and Axle Hole | Pearl Gold | |  |
6 X Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper) | Pearl Gold | |  |
9 X Minifigure, Utensil Ingot / Bar | Pearl Gold | |  |
6 X Slope, Curved 1 x 2 x 2/3 Wing End | Pearl Gold | |  |
4 X Plate, Modified 1 x 2 with 3 Teeth (Claws) | Pearl Gold | |  |
1 X Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper) | Pearl Gold | |  |
3 X Slope, Curved 2 x 2 x 2/3 with Two Studs and Curved Sides | Pearl Gold | |  |
4 X Minifigure, Headgear Hat, Conical Asian | Pearl Gold | |  |
2 X Bionicle Wing Small / Tail with Axle Hole | Pearl Gold | |  |
2 X Wheel 30.4mm D. x 20mm with No Pin Holes and Reinforced Rim | Pearl Gold | |  |
2 X Ring 4 x 4 with 2 x 2 Hole and 4 Arrow Ends (Ninjago Spinner Crown) | Pearl Gold | |  |
1 X Propeller 1 Blade 16L with Axle (Sword Blade) | Pearl Gold | |  |
1 X Technic, Circular Saw Blade with Pin Hole and Six Teeth (Large Shuriken) | Pearl Gold | |  |
2 X Pneumatic Hose Connector with Axle Connector | Dark Brown | |  |
8 X Plate, Round 2 x 2 with Axle Hole | Dark Brown | |  |
2 X Technic, Pin Connector Round 2/3 L | Flat Silver | |  |
3 X Minifigure, Weapon Sword, Shamshir/Katana (Square Guard) with Capped Pommel and Holes in Crossguard and Blade | Flat Silver | |  |
4 X Technic, Pin Connector Round 2L with Slot (Pin Joiner Round) | Pearl Dark Gray | |  |
1 X Minifigure, Weapon Crossbow | Pearl Dark Gray | |  |
4 X Technic, Brick 1 x 2 with Axle Hole | Dark Azure | |  |
3 X Minifigure, Weapon Sword, Shamshir/Katana (Square Guard) with Capped Pommel and Holes in Crossguard and Blade | Medium Azure | |  |
1 X Tornado Spiral with Trans-Light Blue Top Pattern | Light Aqua | |  |
1 X Minifigure, Weapon Naginata with Trans-Light Blue Blade End Pattern | Pearl Dark Gray | |  |
5 X Plate, Round 1 x 1 | Trans-Bright Green | |  |
3 X Projectile Arrow, Bar 8L with Round End (Spring Shooter Dart) | Trans-Bright Green | |  |
6 X Hinge Plate 3 x 12 with Angled Side Extensions and Tapered Ends | Trans-Bright Green | |  |
8 X Slope, Curved 2 x 2 with Light Bluish Gray Scale Armor Outlines and Red Highlights Pattern | White | |  |
1 X Sticker Sheet for Set 70676 - (54597/6265610) | (Not Applicable) | |  |
1 X Tile, Round 1 x 1 | White | |  |
1 X Plate 1 x 1 | White | |  |
1 X Slope 30 1 x 1 x 2/3 | White | |  |
1 X Technic, Bush | Red | |  |
1 X Technic, Pin 1/2 | Blue | |  |
2 X Hinge Plate 1 x 2 Locking with 1 Finger on Side without Bottom Groove | Yellow | |  |
1 X Technic, Pin with Friction Ridges Lengthwise, Staggered, with or without Center Slots | Black | |  |
1 X Tile, Round 1 x 1 Quarter | Dark Bluish Gray | |  |
1 X Plate, Round 1 x 1 with Flower Edge (5 Petals) | Pearl Gold | |  |
1 X Plate, Round 1 x 1 with Open Stud | Pearl Gold | |  |
1 X Tile, Round 1 x 1 with Bar and Pin Holder | Pearl Gold | |  |
1 X Technic, Pin Connector Round 2/3 L | Flat Silver | |  |
1 X Minifigure, Weapon Sword, Shamshir/Katana (Square Guard) with Capped Pommel and Holes in Crossguard and Blade | Flat Silver | |  |
1 X Minifigure, Weapon Sword, Shamshir/Katana (Square Guard) with Capped Pommel and Holes in Crossguard and Blade | Medium Azure | |  |
1 X Plate, Round 1 x 1 | Trans-Bright Green | |  |
Отзывы о наборе LEGO 70676